USING LOGICAL PROCESSINGXEROX DOCUPRINT 180 LPS PDL REFERENCE 7-37subsequent report unless it also satisfies the TEST (orDJDE) criteria of the starting JDE or JDL.— If RSTACK is specified in the JDE or JDL of the STARTcommand but not in the selected JDE or JDL, RSTACKprocessing is suspended until end of report is triggered byBANNER page detection.— If ACCTINFO is specified in the JDE or JDL of the STARTcommand, the ACCTINFO parameter cannot be changedor deleted in a selected JDE or JDL (even if RSTACK issuspended).— If ACCTINFO is not specified in the JDE or JDL of theSTART command, it can be invoked in a selected JDE orJDL. The first record after the selected JDE takes effect isthen printed as the ACCTINFO field.The following sections describe the syntax of the commandparameters and explanations of the parameter options.ACCTINFOThis parameter specifies that a subfield of the first record is beingprinted on the accounting page at the end of the report. IfDELIMITER=YES is also coded, the subfield is from the first delimiterrecord of the report. For DELIMITER=NO the subfield is from the firstdata record.Syntax RSTACK ACCTINFO =option(s)Options Table 7-24 lists the parameter option(s) and definition(s).There is no default.Table 7-24. ACCTINFO parameter option(s) and definition(s)Option(s) Definition(s)(offset,length) This option has the following components:•offsetSpecified in bytes (relative to zero) from thestart of the user’s portion of the record to thesubfield within the record.•lengthThe number of bytes in the subfield (1 to 64).
