PRINT FORMAT COMMANDS6-86 XEROX DOCUPRINT 180 LPS PDL REFERENCEPoints to note — OUTPUT commandNote the following when using the OUTPUT command. These pointsto note list parameters followed by the applicable action or systemresponse.• DUPLEX=YES— Any job that runs in simplex mode runs in duplex modeexcept transparencies.— A recoverable dispatching or imaging error on an even-numbered page results in one additional hole in the paperpath and up to seven aborted pages to the sample tray. Arecoverable dispatching or imaging error on an odd-numbered page results in one additional hole in the paperpath with no aborted pages to the sample page.• COLLATEOnce you have specified multiple copies, the value of theCOLLATE parameter cannot be changed again within thereport.• NT01, FACEUP, DUPLEX, COLLATEThe NT01, FACEUP, DUPLEX, and COLLATE parametersfollow a specific hierarchy by which one command parameterforces changes in certain other command specifications when aYES option is selected. This hierarchy of forced conditions isshown in table 6-71. The first column gives the condition thatwill force the parameters shown in the columns to the right.Example: FACEUP=YES, COLLATE=NO;Example: NTO1=YES, FACEUP=NO;• NTO1 and 1TON system defaults— During system generation, you may select either 1TON orNTO1 as the system default in the DEFAULT ORDER ={1-N | N-1} window.— When the system default is 1TON, NTO1 is processed onlyif it is invoked in the JDE or JDL. The system ignores NTO1in DJDE-selected JDEs or JDLs.— When the system default is NTO1, the system assumeseach report is NTO1 until the first data page, even if 1TONis specified in the JDE or JDL. This arrangement allowsyou to use DJDE-selected JDEs and JDLs that invokeNTO1 after a series of banner pages.— The following examples illustrate these conditions:Table 6-72. OUTPUT command parameter hierarchy of forcedconditions from highest to lowest priorityParameterspecificationResults inNTO1=Results inFACEUP=Results inCOLLATE=Results inDUPLEX=NTO1=YES — — YESspecifiedoptionFACEUP=YES — — —specifiedoption
