PRINT FORMAT COMMANDSXEROX DOCUPRINT 180 LPS PDL REFERENCE 6-23EXPORT commandA “segment” is a set of consecutively delivered sheets whosemanagement as a set or segment has been specified by PDL orDJDE command.The EXPORT statement enables specification in PDL of the newSegment Management capabilities, including the following:• Division of reports into segments• Generation of separator sheets• Use of segment numbers on separator sheets• Use of segment recovery in place of page recovery.Although the EXPORT command is primarily intended to be usedwith the bypass transport option, it functions with any allowabledestination. If the OUTPUT command DESTINATION parameterspecifies BIN, segments are offset relative to each other whendelivered, and offsetting resulting from other commands is notprocessed.Table 6-18 summarizes the EXPORT command parameters.The following sections describe the syntax of the commandparameters and explanations of the parameter options.Table 6-18. Summary of EXPORT command parametersParameter Specifies Offline Online DJDESEPARATORS Retain an internal copy of the first data page and use it togenerate segment separator sheetsY Y YSNUMBER Print the segment number on generated segment separatorsheetsY Y YSPLIT The conditions for ending segments and turning segmentmanagement onY Y YSRECOVER Recovery mode Y Y YSTIMING This command is listed for compatibility only. It is not supportedon the DocuPrint 180 LPSY Y Y
