SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)XEROX DOCUPRINT 180 LPS PDL REFERENCE 8-51MODIFYThis parameter specifies the copy modification entry (CME) to beused in report processing. It takes effect at the next logical physicalpage boundary. A cme-id refers to a file which is separatelycataloged in the CME directory. Refer to the “CME” section in thechapter "Print format commands" for further information. Theparameters are the same as those in the OUTPUT command definedin the chapter "Print format commands."Syntax MODIFY =option(s)Options Table 8-38 lists the parameter option(s) and definition(s).Table 8-42. MODIFY parameter option(s) and definition(s)Option(s) Definition(s)(cme-id,[init][,copies])NONEThis option has the following components:•cme-idThe command identifier of a CME. TheCME may be coded within a JSL or codedand cataloged separately for use by severalJSLs. Any CME invoked by a DJDE must becataloged separately (refer to the“Cataloged CMEs” section in this chapterfor further information). If the CME is withinthe JSL, it must precede a reference to itsidentifier by the MODIFY parameter. Detailson CME usage and syntax are discussed inthe “CME” section of the "Print formatcommands" chapter.•initSpecifies the initial ply (pass) to which theassociated CME is to be applied.•copiesSpecifies the number of plies (passes) onwhich to apply the CME. If copies is notspecified, then the CME applies to allcopies beginning with the copy numberspecified by init.• NONESpecifies that data are processed withoutmodification.The default is NONE.
