1512. To remove a service screen button:a. Touch the service that you want to remove (for instance, Internet Fax).b. Touch [Not Assigned].c. Touch [Save].The screen refreshes and returns to the All Services screen.d. Touch [Save] again.The screen refreshes and returns to the Screen / Button Settings screen.13. Touch [Close].14. Touch [Log In/Out] button.15. Touch [Logout].Rearrange IconsYou can also use this feature to rearrange the icons. The service listed as #1 will be at the top left of the AllServices screen, #2 will be to the right of it, and so on.Smart eSolutions (Meter Assistant and SuppliesAssistant)Select this feature in Internet Services to access and set up automatic billing meter reading and automaticmachine supplies reporting. Note that this feature may currently be available only in the U.S.A.Note: Additional Smart eSolutions information and procedures may be found on xerox.com. Look thereto ensure that you have the most complete and up to date information available.Information ChecklistMake sure that you have an account on Xerox.com. Add all devices in inventory that you wish to registerfor Automatic Meter Readings to your account. This is supported by Dallas eSupport 888-998-9922.TCP/IP and HTTP protocols must be enabled on the device so that the device web browser can beaccessed (for Device Direct registration, described in this procedure).To use the optional Smart eSolutions Windows Client or CentreWare Web, you will need to enable SNMPas stated in this guide. For full information on these applications, visit www.xerox.com/smartesolutions.At Your Workstation1. Open your Web Browser and enter the TCP/IP address of the machine in the Address or Location fieldand press Enter.2. Click the Properties tab.3. Click the symbol to the left of General Setup.4. Click the symbol to the left of Smart eSolutions.5. Click Registration.6. Click Enable Proxy Server. Note: If your network does not require a Proxy Server, you can skip tostep 13 below. You will, however, need to have DNS settings enabled (see TCP/IP ProtocolConfiguration in this guide).7. Place a check mark in the Use Proxy Server box.
