73Enter the Fax Repository Details via Internet Services5. At your workstation, open your Web browser and enter the IP address of the machine in the Addressor Location field. Press Enter.6. Click the Properties tab.7. Click the Services folder.8. Click on the Fax folder.9. Click the Fax Repository Setup link.10. Select FTP for Protocol.11. Enter either an IP Address or Host Name for the fax server in the box or boxes provided.12. Enter 21 for Port Number (for FTP).13. For Document Path, type in the name of the folder on the server that has been set up to receive devicescans. Do not use forward slashes.14. Supply the Login Name and Password for the machine to log into the fax server.15. Re-enter the password in the Retype Password box.16. Click Apply.17. Enter the administrator User Name and Password and click OK. The default is 11111 and x-admin.Configure General Settings18. Click the Defaults link.19. To print a Scan File Transfer Report, select Auto Print On, Auto Print Off, or Print when delivery fails,from the drop-down menu. Note that the Transfer Report only shows whether data was sent to the faxserver. It does not show whether the fax was successfully sent by the fax server.20. Check the User Name and Domain Name (Realm) boxes if you want these items to appear on the JobLog. The Job Log is filed with the scan job.21. Click Apply.22. Enter the administrator User Name and Password and click OK. The default is 11111 and x-admin.Configure the Fax Server23. Configure the fax server so that it is able to monitor the fax repository for incoming documents. Referto the fax management software manufacturer's documentation to complete this task.Test Faxing through the Server24. Go to the machine and press the All Services button.25. Press the Fax button.26. Enter a valid fax number.27. Place a document in the document handler and press the Start button located to the immediate right ofthe Control Panel's numeric keypad.28. Verify that the fax was received by the specified fax machine.
