YASKAWA SI-EP3 Technical Manual

Also see for SI-EP3: Technical manual Technical manual Installation manual Installation manual

9 Web InterfaceYASKAWA SIEP C730600 89E PROFINET Technical Manual 49Figure 9.6 Parameter Access Page ViewThe MEMOBUS/Modbus address for the drive parameter being accessed must be entered in hexadecimal.Clicking “Read” will load and display the current value of the given MEMOBUS/Modbus Address.Clicking “Set” will save the given value to the given MEMOBUS/Modbus address.After a “Read” or “Set” command is given, Status will display “Waiting” while the action is being carried out, then“Read Successful” or “Write Successful” is displayed when finished.◆ Settings PageThe Settings page sets web page behavior parameters. Access is restricted unless a valid password is entered.Figure 9.7 Settings Page View■ Security LoginClick “Login” and enter a valid password. The button text will change to “Log out” and the status will change to“Logged in”.Note:The default security password is “yaskawa”.This password can be changed in the “Change Password” section of the Settings page.Entering a valid password allows access to the settings in the Settings page, Email Alerts page, and the ParameterAccess page.■ Webpage PasswordTo change the password, enter the new password in the “New Password:” and “Confirm Password:” text boxes.Click “Save password”.■ Webpage SettingsThe values displayed in the various tabs are refreshed at the rate defined in the “Data Update Time” select box.The Data Update Time can be set to 250 ms, 500 ms, 1 second, 2 seconds, or 5 seconds.