YASKAWA SI-EP3 Technical Manual

Also see for SI-EP3: Technical manual Technical manual Installation manual Installation manual

2 OverviewYASKAWA SIEP C730600 89E PROFINET Technical Manual 7Product Series Model(s) Software Version *1CIMR-UxxFxxxxCIMR-UxxRxxxxCIMR-UxxSxxxxZ1000UCIMR-ZxxAxxxx≥ 6110CIMR-ZxxExxxxCIMR-ZxxPxxxxCIMR-ZxxWxxxxGA500 *2 CIPR-GA50xxxxx ≥ 1010GA700 *2 CIPR-GA70xxxxx ≥ 1010GA800 *2 CIPR-GA80xxxxx ≥ 9010CR700 *2 CIPR-CR70xxxxx ≥ 1012CH700 *2 CIPR-CH70xxxxx ≥ 1012HV600 *2 CIPR-HV60xxxxx ≥ 1011*1 Refer to “PRG” on the drive nameplate for the software version number.*2 Before you install the option on a YASKAWA AC Drive GA500, GA700, GA800, CR700, CH700, or HV600, make sure that theoption software version is PRG: 4400 or later.Note:• Refer to the option package labeling in the field designated “PRG (four digit number)” or the option labeling in the field to identify theoption software version. Refer to Figure 4.1 for more information.• For Yaskawa customers in the North or South America region:If your product is not listed in Table 2.1, refer to the web page below to confirm this manual is correct for your product. The web pageprovides a list of option manuals by product, and a direct link to download a PDF.Scan QR code Or refer to:http://www.yaskawa.com/optionlookup◆ Install the Option on a GA500 DriveAn option card mounting kit is necessary to install the option on a GA500 drive. The option card mounting kitmodel is JOHB-GA50. This kit is sold separately.Refer to the option card mounting kit manual for more information about installation.