YASKAWA SI-EP3 Technical Manual

Also see for SI-EP3: Technical manual Technical manual Installation manual Installation manual

2 Overview6 YASKAWA SIEP C730600 89E PROFINET Technical ManualThe following conventions are used to indicate safety messages in this manual. Failure to heed these messagescould result in serious or possibly even fatal injury or damage to the products or to related equipment and systems.DANGER This signal word identifies a hazard that will cause serious injury or death if you do not prevent it.WARNING This signal word identifies a hazard that can cause death or serious injuries if you do not prevent it.CAUTION Identifies a hazardous situation, which, if not avoided, can cause minor or moderate injury.NOTICE This signal word identifies a property damage message that is not related to personal injury.■ Section SafetyGeneral Precautions• The diagrams in this section may include options and drives without covers or safety shields to illustrate details. Be sure to reinstall covers or shields before operating anydevices. The option should be used according to the instructions described in this manual.• The diagrams in this manual are provided as examples only and may not pertain to all products covered by this manual.• The products and specifications described in this manual or the content and presentation of the manual may be changed without notice to improve the product and/or themanual.• Contact Yaskawa or a Yaskawa representative and provide the manual number shown on the front cover to order new copies of the manual.DANGER Do not ignore the safety messages in this manual. If you ignore the safety messages in this manual, it willcause serious injury or death. The manufacturer is not responsible for injuries or damage to equipment.WARNING Electrical Shock Hazard. Do not modify the body or circuitry of drive or option. Failure to obey can causedamage to the drive and will void warranty. Yaskawa is not responsible for modifications of the product made by the user.NOTICE Do not use steam or other disinfectants to fumigate wood for packaging the drive. Use alternative methods,for example heat treatment, before you package the components. Gas from wood packaging fumigated with halogendisinfectants, for example fluorine, chlorine, bromine, iodine or DOP gas (phthalic acid ester), can cause damage to the drive.2 OverviewThis option provides a communications connection between the drive and a PROFINET network. The optionconnects the drive to a PROFINET network and facilitates the exchange of data.PROFINET is a communications link to connect industrial devices (such as smart motor controllers, operatorinterfaces, and variable frequency drives) as well as control devices (such as programmable controllers andcomputers) to a network. PROFINET is a simple networking solution. PROFINET reduces the cost and time towire and install factory automation devices, while providing interchangeability of like components from multiplevendors.PROFINET is an open network standard.Install the option/PROFINET option on a drive to perform the following functions from a PROFINET masterdevice:• Operate the drive• Monitor the drive operation status• Change drive parameter settingsSI-EP3 is PROFINET Conformance Class A certified.◆ Compatible ProductsYou can use the option with these products:Table 2.1 Compatible ProductsProduct Series Model(s) Software Version *1A1000CIMR-Ax2Axxxx≥ 1018CIMR-Ax4AxxxxCIMR-Ax5Axxxx ≥ 5040≥ 1010U1000CIMR-UxxAxxxx≥ 1010CIMR-UxxExxxxCIMR-UxxPxxxxCIMR-UxxWxxxxU1000L CIMR-UxxLxxxx ≥ 6210