YASKAWA SI-EP3 Technical Manual

Also see for SI-EP3: Technical manual Technical manual Installation manual Installation manual

11 European Standards52 YASKAWA SIEP C730600 89E PROFINET Technical Manual*2 If you use the motor switching function, you cannot use this option.*3 Not available with 1000-Series drive models with a capacities between 450 and 630 kW.*4 To use AI-A3 and DI-A3 input statuses as monitors, connect the options to one of CN5-A, CN5-B, or CN5-C.11 European StandardsFigure 11.1 CE MarkThe CE mark indicates compliance with European safety and environmental regulations.European standards include the Machinery Directive for machine manufacturers, the Low Voltage Directive forelectronics manufacturers, and the EMC guidelines for controlling noise.It is required for engaging in business and commerce in Europe.This option displays the CE mark based on the EMC guidelines.EMC Guidelines: 2014/30/EUDrives used in combination with this option and devices used in combination with the drive must also be CEcertified and display the CE mark.When using drives displaying the CE mark in combination with other devices, it is ultimately the responsibility ofthe user to ensure compliance with CE standards. Verify that conditions meet European standards after setting upthe device.◆ EMC Guidelines ComplianceThis option is tested according to European standards EN 61800-3:2004/A1:2012 and complies with EMCguidelines. The CE marking is declared based on the harmonized standards.■ EMC Guidelines Installation ConditionsVerify the following installation conditions to ensure that other devices and machinery used in combination withthis option and drives also comply with EMC guidelines:1. Use dedicated shield cable for the option and external device (encoder, I/O device, master), or run thewiring through a metal conduit.2. Keep wiring as short as possible and ground the largest possible surface area of the shield to the metalpanel according to Figure 11.2 and Figure 11.3.Figure 11.2 Option Installation for CE Compliance: 1000-Series, GA700, GA800, CR700, CH700