u Three-Phase 480 Vac Models Z1B1B001 to B034Table A.3 Power Ratings (Three-Phase 480 V)Item SpecificationBypass Model Z1B1 B001 B002 B003 B004 B007 B011 B014 B021 B027 B034MaximumApplicableMotorCapacityHP <1> 0.75 1 2 3 5 7.5 10 15 20 25kW 0.55 0.74 1.5 2.2 3.7 5.5 7.5 11 14.7 18.4InputInput Current (A) <2> 1.8 2.3 3.6 5.0 7.8 11.2 14.2 21.2 27.2 34.2Rated VoltageRated Frequency Three-phase 480 Vac 50/60 HzAllowable Voltage Fluctuation -15 to 10%Allowable Frequency Fluctuation ±5%OutputRated Output Current (A) 1.6 <3> 2.1 <3> 3.4 <3> 4.8 <3> 7.6 <3> 11.0 <3> 14.0 <3> 21.0 <3> 27.0 <3> 34.0 <3>Overload Tolerance 110% of rated output current for 60 s150% peakCarrier Frequency User adjustable between 1 and 12.5 kHz(Maximum Frequency varies with Rated Output Capacity)Maximum Output Voltage (V) Three-phase 480 VMaximum Output Frequency (Hz) 240 HzHarmonicsReduction DC Link Choke Built-inEMC Filter (IEC/EN 61800-3 Category 2) Built-in<1> The motor capacity (HP) refers to an NEC Table 430.250 208 V motor. The rated output current of the drive output amps should be equal to orgreater than the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiringconnections, and power supply impedance.<3> Carrier frequency is set to 5 kHz. Current derating is required to raise the carrier frequency.A.1 Power Ratings302 YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
