u HOA Keypad Keys and DisplaysALMDIGITAL OPERATOR JVOP-183 12119811323104 5 6 7F2F1ESCM MENTERRESETHANDAUTO OFFFigure 4.2 Description of HOA Keypad Keys and DisplaysNo. Display Name Function1F1F2Function Key F1(Drive Test) Selects Drive Test ModeFunction Key F2(Bypass/Drive) Toggles selection between Bypass Mode and Drive Mode.2 ESC ESC Key• Returns to the previous display.• Moves the cursor one space to the left.• In Drive Mode, pressing and holding this button will return to the Frequency Reference display.• In Bypass Mode, pressing and holding this button will return to the Bypass Main Menu.• During parameter entry, allows aborting the current edited value and exits the parameter editingmode.3 RESET Key • Moves the cursor to the right.• Resets the bypass or drive to clear a fault situation.4 AUTO AUTO Key Selects AUTO mode.5 Up Arrow Key Scrolls up to display the next item, selects parameter numbers, and increments setting values.6 Down Arrow Key Scrolls down to display the previous item, selects parameter numbers, and decrements setting values.7 OFF OFF KeySelects OFF mode.If the drive was operating the motor, the motor will stop according to the stopping method selected inb1-03.If the bypass was operating the motor, the bypass contactor opens and the motor coasts to a stop.8 ENTER Key • Enters parameter values and settings.• Selects a menu item to move between displays.9 HAND HAND Key Selects HAND mode.10 AUTO AUTO Light Lit while the drive is in AUTO mode. Refer to page 95 for details.11 HAND HAND Light Lit while the drive is in HAND mode. Refer to page 95 for details.12 ALM LED Light Refer to ALARM (ALM) LED Displays on page 95.13<1> ESCM M ESC KeyUp Arrow Key In Drive Mode, during parameter entry, pressing both ESC Key and Up Arrow Key simultaneouslywill return to the monitor menu without changing the parameter value.<1> Available for bypass control software versions VST800400 and later.4.2 Using the HOA Keypad92 YASKAWA ELECTRIC SIEP YAIZ1B 01E YASKAWA AC Drive – Z1000 Bypass Technical Manual
