4.2 Using the HOA KeypadUse the HOA keypad to enter OFF commands, switch AUTO or HAND Mode, change parameters, and display data includingfault and alarm information.u HOA Keypad Keys and DisplaysALMDIGITAL OPERATOR JVOP-183 121198123104 5 6 7F2F1ESCM MENTERRESETHANDAUTO OFFFigure 4.1 Keys and Displays on the HOA KeypadNo. Display Name Function1F1F2Function Key(F1, F2) The functions assigned to F1 and F2 vary depending on the currently displayed menu. The name ofeach function appears in the lower half of the display window.2 ESC ESC Key• Returns to the previous display.• Moves the cursor one space to the left.• Pressing and holding this button will return to the Frequency Reference display.3 RESET Key • Moves the cursor to the right.• Resets the drive to clear a fault situation.4 AUTO AUTO KeySelects the source of Run command and frequency reference.• Set the drive to AUTO mode.• Run command input source depends on b1-02.• Frequency reference input source depends on b1-01.5 Up Arrow Key Scrolls up to display the next item, selects parameter numbers, and increments setting values.6 Down Arrow Key Scrolls down to display the previous item, selects parameter numbers, and decrements setting values.7 OFF OFF Key Follows the stopping method set in b1-03 to stop drive operation.Note: The OFF key is DISABLED during Emergency Override.8 ENTER Key • Enters parameter values and settings.• Selects a menu item to move between displays.9 HAND HAND KeyThe drive runs at a selectable frequency reference source by S5-01.• Set the drive to HAND mode.• When S5-02 is set to 1, HAND and AUTO mode can be switched while the drive is running.10 AUTO AUTO Light Lit while the drive is in AUTO mode. Refer to page 109 for details.11 HAND HAND Light Lit while the drive is in HAND mode. Refer to page 109 for details.12 ALM LED Light Refer to ALARM (ALM) LED Displays on page 109.4.2 Using the HOA KeypadYASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual 1074 Start-Up Programming& Operation
