u Three-Phase 200 V Class Drive Models 2A0114 to 2A0396Table A.2 Power Ratings Continued (Three-Phase 200 V Class)Item SpecificationCIMR-Zo2A 0114 0143 0169 0211 0273 0343 0396MaximumApplicableMotorCapacity <1>HP 40 50 60 75 100 125 150kW 30 37 45 55 75 90 110InputInput Current (A) <2> 114 143 169 211 273 343 396Rated VoltageRated Frequency Three-phase 200 to 240 Vac 50/60 HzAllowable Voltage Fluctuation -15 to 10%Allowable Frequency Fluctuation ±5%Minimum Power Supply Capacity (kVA) 48 60 71 88 114 143 165OutputRated Output Capacity (kVA) <3> 45 57 67 84 109 137 158Rated Output Current (A) 114 <4> 143 <4> 169 <4> 211 <4> 273 <4> 343 <5> 396 <5>Overload Tolerance 110% of rated output current for 60 s140% of rated output current for 0.5 sCarrier Frequency User adjustable between 1 and 12.5 kHz(Maximum Frequency varies with Rated Output Capacity)Maximum Output Voltage (V) Three-phase 200 to 240 V (proportional to input voltage)Maximum Output Frequency (Hz) 240 HzHarmonicsReduction DC Link Choke Built-inEMC Filter (IEC/EN 61800-3 Category 2) Built-in External<1> The motor capacity (HP) refers to an NEC Table 430.250 208 V motor. The rated output current of the drive output amps should be equal to orgreater than the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiringconnections, and power supply impedance.<3> Rated motor capacity is calculated with a rated output voltage of 230 V.<4> Carrier frequency is set to 5 kHz. Current derating is required to raise the carrier frequency.<5> Carrier frequency is set to 2 kHz. Current derating is required to raise the carrier frequency.A.1 Power RatingsYASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual 269A Specifications
