No.(Addr.Hex) Name LCD Display Description AnalogOutput Level UnitU5-06(07D3) PI Adjusted Feedback PI Diff FdbkDisplays the difference of both feedback values if DifferentialFeedback is used (U5-01 - U5-05).If PI Square Root Feedback or Differential Feedback are enabled,U5-01 ≠ U5-06.If PI Square Root Feedback or Differential Feedback are NOTenabled, U5-01 = U5-06.10 V: 100% 0.01%U5-07(0072) AUTO Mode FrequencyReference Value AUTO mode Fref Displays the Frequency reference value at AUTO Mode. No signal outputavailable 0.01 HzU5-08(0073) HAND Mode FrequencyReference Value HAND mode Fref Displays the Frequency reference value at HAND Mode. No signal outputavailable 0.01 HzU5-14(086B) PI Output Upper 4 Digits PI Output U4Displays Custom PI output. U5-14 shows the upper 4 digits. 10V: (b5-43 x10000) + b5-44<2>1U5-15(086C) PI Output Lower 4 Digits PI Output L4 Displays Custom PI output. U5-15 shows the lower 4 digits. No signal outputavailable 0.01U5-17(086E) PI2 Setpoint PI2 Set-point Displays the secondary PI setpoint. 10 V: Maxfrequency 0.01%U5-18(086F) PI2 Feedback PI2 Feedback Displays the secondary PI feedback value. 10 V: Maxfrequency 0.01%U5-19(0870) PI2 Input PI2 Input Displays the secondary PI input (deviation between PI target andfeedback). 10 V: Maxfrequency 0.01%U5-20(0871) PI2 Output PI2 Output Displays the secondary PI control output. 10 V: Maxfrequency 0.01%U5-30(3000) Time Hr Min HHMM Time Hr Min HHMM Displays the current time (Hours and Minutes). No signal outputavailable 1U5-31(3001) Date Year Date Year Displays the current year. No signal outputavailable 1U5-32(3002) Date Mo Day MMDD Date Mo Day MMDD Displays the current date (Month and Day). No signal outputavailable 1U5-33(3003) Day of the WeekDate Week0: Sun1: Mon2: Tues3: Wed4: Thur5: Fri6: SatDisplays the current day of the week.0: Sunday1: Monday2: Tuesday3: Wednesday4: Thursday5: Friday6: SaturdayNo signal outputavailable 1<1> Units determined by parameter b5-20, PI Setpoint Scaling.<2> Analog Output selection text is: “PI Output 2”.u U6: Operation Status MonitorsNo.(Addr.Hex) Name LCD Display Description AnalogOutput Level UnitU6-01(51) Motor SecondaryCurrent (Iq) Mot SEC Current Displays the value of the motor secondary current (Iq). Motorrated secondary current is 100%. 10 V: Motorsecondary ratedcurrent 0.1%U6-02(52) Motor ExcitationCurrent (Id) Mot EXC CurrentOLV/PMOLV/PMDisplays the value calculated for the motor excitation current (Id).Motor rated secondary current is 100%.10 V: Motorsecondary ratedcurrent 0.1%U6-05(59) Output VoltageReference (Vq) Voltage Ref (Vq) OLV/PMOLV/PMOutput voltage reference (Vq) for the q-Axis.10 V: 200 Vrms<1> 0.1 VacU6-06(5A) Output VoltageReference (Vd) Voltage Ref (Vd) OLV/PMOLV/PMOutput voltage reference (Vd) for the d-Axis.10 V: 200 Vrms<1> 0.1 VacU6-21(7D5) Offset Frequency Offset Frequency Displays the frequency added to the main frequency reference. – 0.1%B.13 U: Monitors338 YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
