n T1-04: Motor Rated CurrentSets the motor rated current according to the motor nameplate value. Enter the current at the motor base speed.No. Name Setting Range DefaultT1-04 Motor Rated Current 10.0 to 300.0% of drive ratedcurrent Determined byo2-04n T1-05: Motor Base FrequencySets the motor rated frequency according to the motor nameplate value. If a motor with an extended speed range is used orthe motor is used in the field weakening area, enter the maximum frequency to E1-04 after Auto-Tuning is complete.No. Name Setting Range DefaultT1-05 Motor Base Frequency 0.0 to 240.0 Hz 60.0 Hzn T1-06: Number of Motor PolesSets the number of motor poles according to the motor nameplate value.No. Name Setting Range DefaultT1-06 Number of Motor Poles 2 to 48 4n T1-07: Motor Base SpeedSets the motor rated speed according to the motor nameplate value. Enter the speed at base frequency when using a motorwith an extended speed range or if using the motor in the field weakening area.No. Name Setting Range DefaultT1-07 Motor Base Speed 0 to 14400 r/min 1750 r/minn T1-11: Motor Iron LossProvides iron loss information to determine the Energy Saving coefficient. T1-11 will first display the value for the motor ironloss that the drive automatically calculated when the motor capacity was entered to T1-02. Enter the motor iron loss valuelisted to T1-11 if the motor test report is available.No. Name Setting Range DefaultT1-11 Motor Iron Loss 0 to 65535 W 14 Wn T1-12: T1 Tuning StartSet T1-12 to 0 to start IM Auto-Tuning.No. Name Setting Range DefaultT1-12 T1 Tuning Start 0 –u T2: Parameter Settings during PM Motor Auto-TuningThe T2-oo parameters are used to set the Auto-Tuning input data for PM motor tuning.n T2-01: PM Motor Auto-Tuning Mode SelectionNo. Name Setting Range DefaultT2-01 PM Motor Auto-Tuning Mode Selection 0 0Setting 0: PM Motor Parameter Settings4.8 Auto-Tuning148 YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
