CRANK SHAFT5-51EPOWRRun-out check1. Measure:• RunoutUse the crank stand alignmentand digital gauge .Out of specification → Adjust.NOTE:If the dial gauge reading is 0.03 mm (0.0012in) or more, adjust the crankshaft so thatthe reading is less than 0.03 mm (0.0012 in).Use a copper hammer, as shown.2. Measure:• Axial playOut of specification →Repair/replace.CHECKING THE CRANKSHAFTRefer to "CHECKING THE CRANKSHAFT" onpage 5-34.Crank stand alignment90890-03107Digital gauge set90890-01252Runout limit0.03 mm (0.0012 in)Maximum axial play “ ”2.0 mm (0.079 in)12f
