CONTROL SYSTEM3-8ECHKADJvvvv(5) "Loosen the bolt, and align the full-open marking "C" with the center ofcarburetor throttle roller, and tightenthe set-bolt."NOTE:Remove the manual starter before adjust-ing.(6) "Loosen the rod tightening screw .While pushing the rod with your finger,tighten the screw so that the throttle isfull-open (the full-open stopper ispushed against the stopper ), andlock the screw."NOTE:After adjustment, open and close the throt-tle repeatedly for several times to reassurethat the full-open position of the acceleratorcam and the positioning of the carburetorcontrol link stopper are correct.4. Adjustment with full-closed throttle:• Accelerator cam• Carburetor control linkAdjustment steps(1) Set the shift lever in forward posi-tion.(2) Move the throttle to full-close posi-tion.abc12
