EHOW TO USE THIS MANUAL1 The main points regarding removing/installing and disassembling/assembling proce-dures are shown in the exploded views.2 The numbers in the exploded views indicate the required sequence of the procedure andshould be observed accordingly.3 Symbols are used in the exploded views to indicate important aspects of the procedure.A list of meanings for these symbols is provided on the following page.4 It is important to refer to the job instruction charts at the same time as the exploded views .These charts list the sequence that the procedures should be carried out in, as well asproviding explanations on part names, quantities, dimensions and important points relat-ing to each relevant task.5 In addition to tightening torques, the dimensions of the bolts and screws are also men-tioned.Example:Bolt and screw size 10 × 25 mm : bolt and screw diameter (D) × lenght (L)6 In addition to the exploded views and job instruction charts, this manual provides indi-vidual illustrations when further explanations are required to explain the relevant proce-dure.1234256
