IGNITION SYSTEM8-6E– +ELEC(4) Crank the engine and observe the sparkthrough the discharge window of theignition tester.NOTE:• If there is no spark or the spark is weak,check spark plug cap, ignition coil,pulser coil, charge coil and CDI unit.• If a good spark is obtained, the problemis not with the ignition system, but pos-sibly with the spark plug(s) or anothercomponent.CHECKING THE SPARK PLUG CAPSCheck• Spark plug capCrack/damage → Replace.REMOVING THE SPARK PLUG CAPS(STANDARD TYPE)Removing steps(1) Remove the spark-plug cap by pull-ing the cap, and remove the plug-cupspring from the high-tension cable.INSTALLING THE SPARK PLUG CAPS(STANDARD TYPE)Installing steps(1) Cut about length off the end of thehigh-tension cable .OKLength5mm (0.20 in)1123a3a
