CONTROL SYSTEMCHKADJ3-7E(6) If they are not in contact, loosen the setbolt , adjust until they are correctly incontact with each other, and secure thebolt again.3. Adjusting the carburetor control link:• Accelerator cam• Carburetor control linkAdjustment steps(1) Set the shift lever in forward posi-tion.(2) Move the throttle to full-open posi-tion.(3) Make sure that the magnet base stopperis in contact with the stopper on theengine body (full-open end stopper) .(4) Check to see that the full-open marking"C" on the accelerator cam aligns withthe center of the cam roller.64361234
