CARBURETOR4-18EFUEL2. Measure:• Float heightOut of specification → ReplaceNOTE:• The float should be resting on the nee-dle valve, but not compressing the nee-dle valve.• Take measurement at the top of thefloat flange opposite to its pivoted side.• Float height which is out of specifica-tion cannot be adjust. Replace the floatwith a new one.3. Install:• Float chamber packing• Float chamber4. Install:• Accel arm• Accel link shaft5. Install:• Pilot screw (Gasoline)• Pilot screw (Kerosene)CAUTION:Do not cause damage to the tip of the pilotscrew by over-tightening it.Float height18.0 mm (0.709 in)a121212
