CONTROL SYSTEMCHKADJ3-13E(3) Check that the magnet base stopperis in contact with the stopper on theengine body (full-open end stopper) .(4) Check that the throttle control leveris in contact with the stopper on thebottom cowling.(5) If they are not in contact, adjust thelength of the joint link so that thethrottle control lever seats on the stop-per on the bottom cowling.NOTE:After adjustment, open and close the throt-tle repeatedly for several times to reassurethe correct positioning.(6) Check that the magnet base stopperis in contact with the stopper on theengine body (full-open end stopper) .NOTE:If they are not in contact, perform theadjustment with full-open throttle.Refer to "Adjustment with full-open throt-tle:" on page 3-6.(7) In this condition, make sure that thefull-open stopper is in contact with thestopper.NOTE:If they are not in contact, adjust the carbu-retor control link.Refer to "Adjusting the carburetor controllink:" on page 3-7.43433456c34
