6-17EDRIVE SHAFTLOWRINSTALLING THE DRIVE SHAFT1. Install:• Forward gear(with the tapered roller bearing)• Drive shaft(with the tapered roller bearing)• Pinion gear2. Tighten:• Pinion gear nutTightening steps(1) Apply 12mm wrench on the pinion gearnut.(2) Support the lower case with rags tohold the wrench in position.(3) Turn the drive shaft holder .NOTE:Tighten the pinion gear nut with the sametools that were used for removal.1Drive shaft holder 3 ......................90890-06517T R..Pinion gear nut50 Nm (5.0 kgf• m, 37 ft• lb)11
