Adaptec GDT8546RZ - ICP Vortex RAID Controller manuals
GDT8546RZ - ICP Vortex RAID Controller
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Using the User Documentation Set
- Document Formats
- Installation Guide
- User's Guide
- RAID Levels
- RAID 4 - Data Striping With a Dedicated Parity Drive
- RAID 5 - Data Striping with Striped Parity
- Levels of Drive Hierarchy Within the ICP RAID Firmware
- Transparency of Host Drives
- Using CD-ROMs, DATs, Tapes, etc
- Determine the RAID Configuration
- Create the RAID Driver Installation Diskette
- Main Menu
- Alternative Methods
- ICP RAID Splash Screen
- Install the ICP RAID Controller
- Roadmap for Quick Installation
- Create a Bootable Host Drive—RAID 1 Mirrored Array
- Configure Host Drives
- Select Physical Drive
- Host Drive Creation Confirmation
- Create a Bootable Host Drive—RAID 5 Disk Array with Hot Fix
- Select Controller
- Create New Host Drive
- Choose Type Menu
- Newly Created Host Drive
- Microsoft Windows 2000 and Windows NT Quick Installation
- Novell NetWare 4.2x, 5.x and 6.x Quick Installation
- Minimum Requirements
- SCO UnixWare 7.1.1 and 8.0 Quick Installation
- RAID Software Suite Quick Installation
- Novell NetWare 4.2x, 5.x and 6.x
- SCO UnixWare 7.1.1 or 8.0
- Operating System Installation Procedures
- Installing an Operating System onto a Host Drive
- Installing an OS onto a Disk Drive not Attached to the ICP RAID Controller
- Upgrading/Replacing Windows NT 4.0 Server installed on a host drive
- Installation to an Existing OS
- Replacing Compatible ICP RAID Controllers in Windows 2000 / XP
- Configuring the RAID Configuration Service
- Enter User Account and Password
- Confirm User Account and Password
- Before you begin
- Available Drivers and Tools on the RAID Software Suite CD-ROM
- Installing Red Hat Linux 7.x on a Host Drive
- Installing an ICP RAID Controller onto an Existing Linux Server
- GDTH Driver Parameters
- Further Driver Parameters
- Using ICPCON Monitoring Utility
- Pre-Installation Requirements Checklist
- New installation of NetWare 4.2x, 5.xx and 6.x
- New Installation of NetWare 5.1x with the SRCRX.HAM Driver
- New Installation of NetWare 6.x with the SRCRX.HAM Driver
- Installing the ICP RAID Controller Tools Kit Package
- ASPI Support for NetWare 4.2x, 5.x
- Adding Additional Capacity after an Online Capacity Expansion
- General Installation Notes
- Installing the ICP RAID Controller as Boot Controller
- An ICP RAID Controller Has Already Been Configured
- Hardware Identifiers of SCSI Devices
- Additional Information
- Host Drive Removal
- Minimum Hardware Requirements
- Additional Installation Notes
- Installing OpenServer on a System with Multiple SCSI or RAID Controllers
- Instructions on mkdev (ADM) for 3.2v5.x (Open Server)
- Remote Monitoring with the SRCD Remote Access Service
- SRCD Installation Instructions
- Minimum Software Requirements
- Installing an Operating System onto an Array Drive or Single Disk
- ICP RAID Controller Installation in an Already Configured FreeBSD System
- ICPCON Features
- Installing and Launching ICPCON
- Installing and Launching ICPCON Under Linux
- Launching ICPCON Under OpenServer
- The ICPCON Program
- Host Drive Types
- Select Interface
- Express Setup / Advanced Setup and Monitor Menus
- Select Host Drive Screen
- Select Physical Drive and Choose Type Screens
- Hard Disk Capacity to Use
- Progress Information: Non-destructive Array Build
- Host Drive Menu for an Existing Host Drive
- Repair Array Drives
- Array Drive Summary
- Advanced Setup
- Configure Controller
- Controller Settings
- Firmware Update
- Select Enclosure
- Advanced Settings Warning
- Cluster Channels Screen
- Periodic Parity Verify Screen
- Periodic Parity Verify Settings
- Configure Physical Devices
- Configure Disk
- Disk Initialization Confirmation
- View Defects/Status
- Select Physical Drive Screen with Initialized and Fragmented Disk
- Enclosure Status
- Configure Logical Drives
- Select Logical Drive
- Configure Array Drives
- Array Drive Menu
- Expand Popup Window
- Remove Drive Confirmation
- Progress Information
- Create New Array Drive
- Strip Size
- Create Host Drive Confirmation
- SAF-TE Auto Hot Plug
- Monitor Menu
- View Statistics
- View Events
- Save Information
- Screen Service Messages and Async. Events
- Introduction
- The ICP RAID Navigator Controls
- The Status Bar
- Window Menu Commands
- Physical Configuration Menu
- Help Menu Commands
- Physical Configuration Window
- Example of a Physical Configuration and the Controller Settings
- Controller Configuration Settings
- I/O Processors
- Direct Access Devices
- Physical Drive Information
- Data Transfer Rates
- Non-Direct Access Devices (Raw Devices)
- Host Drives
- Array Drives
- Array Drive Icons
- Logical Drives
- The Array Drive Information Window
- The Logical Drive Information Window
- Drive Name
- Properties (of a Host Drive)
- Parity Verify
- Expand Array
- Logical Configuration
- Add Hot Fix
- Remove Hot Fix
- Remove RAID 1 Component (Remove a Mirror Drive)
- The Different States of an Array Drive
- The Build / Rebuild State
- The Statistics Window
- The Events Window
- Controller Events
- ICP RAID Navigator Help
- RAID Configuration Service and RAIDMail
- RAID Configuration Service
- RAIDMail
- Log File Name
- A.1 Server Clustering
- A.1.1 ICP RAID Controllers in a Cluster Configuration
- A.1.4 Releasing the Cluster Channels
- A.1.6 Novell Netware Clustering
- A.2 PCI Hot Plug Overview
- B.1 Chaining
- C.1 Boot BIOS Message
- C.2 Physical Device Information
- C.2.2 Fibre Channel Information
- C.2.3 Using ICP RAID Navigator
- C.2.4 Configuring an FC-Enabled RAID Controller for Optimal Performance
- C.3 SES Support
GDT8546RZ - ICP Vortex RAID Controller
Table of contents
- Table Of Contents
- Table Of Contents
- Using the User Documentation Set
- Document Formats
- Regulatory and Certification Information
- Warnings and Cautions
- Installation Procedures
- ICP RAID Controller Component Layout GDT8546RZ
- Installing the ICP RAID Controller
- Changing Jumper Settings
- Jumper Locations and Pin Numbers (GDT8546RZ)
- Controller Jumper Settings GDT8546RZ
- Diagnosis Functions
- Audible Alarm
- Beep Sequences During System Boot
- ICP RAID Controller Hardware Features
- Environmental Specifications
- Operating System Support
- PCI Hot Plug
- A.1 About Firmware Files
- A.4 Updating or Recovering Firmware Using the FRUU
- A.4.1 Creating Firmware Diskettes from the CD-ROM Autorun Menu
- A.4.2 Creating Firmware Diskettes from the Bootable RAID Software Suite CD-ROM
- A.5 Updating Firmware Using XROM ICPCON
Related products
2074700-R - ICP Vortex GDT8514RZ RAID Controller2255100-R - ICP Vortex ICP5805BL RAID Controller2251300-R - ICP Vortex ICP5125BR RAID Controller2251500-R - ICP Vortex ICP5165BR RAID Controller31605 - RAID Controller31205 - RAID Controller2200S - SCSI RAID Controller2120S - SCSI RAID Controller2230SLP - SCSI RAID Controller2130SLP - SCSI RAID ControllerAdaptec categories
Computer Hardware
Controller
Adapter
Software
Host Adapter
Storage
PCI Card
Network Card
Network Storage Server
Enclosure
manualsdatabase
Your AI-powered manual search engine