Software Installation and User’s Guide43Quick Installation3.5.1 Minimum Requirements• RAID Software Suite CD-ROM• 20 MB of free hard disk space• RAID Software Suite Driver Installation Diskette for NetWare (see Section 2.2 forinstructions to create this diskette).— One blank high density floppy diskette† may be required to create the installationdiskette• Novell NetWare 4.2x * or 5.x * software† Not supplied3.5.2 OS Installation Procedures3.5.2.1 New Installation of NetWare 4.20 with the SRCRX.HAM Driver1. Create a driver diskette from the RAID Software Suite CD-ROM. See Section 2.2 fordetails to create this disk.2. Start the OS installation from the NetWare CD-ROM. (NetWare 4.2x CD-ROMs areNOT bootable so you must have a bootable DOS partition installed on your target harddrive and have the appropriate DOS driver for your CD-ROM.)3. At the driver summary menu select modify drivers.4. Insert the driver diskette into drive A:5. Press on the ICP RAID driver list.6. Press in the ICP RAID controller driver menu.7. Press and change the path to A:\DRIVERS\4XX then press .8. Select the SRCRX.HAM driver and complete the installation.3.5.2.2 New Installation of NetWare 5.1x with the SRCRX.HAM Driver1. Create a driver diskette from the RAID Software Suite CD-ROM. See Section 2.2 fordetails to create this disk.2. Start the OS installation from the NetWare bootable CD-ROM.3. At the storage driver summary menu select modify drivers.4. Insert the driver diskette into drive A:5. Press on the storage driver list.6. Press in the storage controller driver menu.7. Press and change the path to A:\DRIVERS\5XX then press .8. Select the SRCRX.HAM driver.9. Complete the installation.
