Software Installation and User’s Guide39Quick Installation7. From the Choose Type menu, select RAID 5 + HotFix and press Enter. SeeFigure 3-24.8. ICPCON displays a warning that all data on the selected disks will be destroyed (seeFigure 3-25). Confirm your choice by pressing .9. ICPCON asks for the capacity to use for each drive (see Figure 3-26). Type in thephysical drive capacity that you recorded in Table 2-1 for RAID 5 and press Enter.10. ICPCON asks if you want to set the host drive type to ‘Cluster’. Refer to yourproduct’s Hardware Guide to determine if clustering is supported before pressing or to confirm your choice.Figure 3-24. Choose Type MenuFigure 3-25. Host Drive Creation ConfirmationFigure 3-26. Drive Capacity
