Software Installation and User’s Guide41Quick InstallationYou may continue the installation by following the instructions in:• Section 2.2, Create the RAID Driver Installation Diskette• Either section 3.4, 3.5, or 3.6, for the applicable OS for your system• Section 3.7, RAID Software Suite Quick Installation.3.4 Microsoft Windows 2000 and Windows NT QuickInstallationThis section covers installing the ICP RAID controller and the OS to a host drive for localadministration of the RAID subsystem. For other Windows installation scenarios, seeChapter 4.3.4.1 Minimum RequirementsMicrosoft Windows 2000• RAID Software Suite CD-ROM• 9 MB of free hard disk space (for the RAID Software Suite)• Microsoft Windows 2000 Professional * , Server* or Advanced Server *• RAID Software Suite Driver Installation diskette (see Section 2.2 for instructions tocreate this diskette)— One blank high density floppy diskette† may be required to create the installationdisketteMicrosoft Windows NT 4.0• RAID Software Suite CD-ROM• 9 MB of free hard disk space (for the RAID Software Suite)• RAID Software Suite Driver Installation diskette (see Section 2.2 for instructions tocreate this diskette)— One blank high density floppy diskette† may be required to create the installationdiskette• Microsoft Windows NT 4.0 Workstation†, Server† or Server Enterprise Edition†† Not supplied3.4.2 OS Installation ProceduresThe following installation procedures highlight the Windows setup options that you mustinstall during OS installation to successfully prepare the operating system for theinstallation of the RAID Software Suite.
