100Software Installation and User’s GuideICP RAID ConsoleFigure 10-36. Select Interface10.3.1 Select InterfaceInterface represents the way in which the OS version of ICPCON connects with the ICPRAID controller. In this example “Win. 9x/NT/2k” (see Figure 10-36) indicates that theICPCON is the Windows version and is loaded on a Windows system. If you press Enter,ICPCON scans the local system for ICP RAID controllers.Selecting “Sockets” allows for the remote connection of this workstation with serversusing ICP RAID controllers. Select TCP/IP or IPX/SPX network protocols. To access theservers with ICP RAID controllers, the corresponding remote service must be loaded onthe server. Users must be assigned access rights (Name, password). See Figure 10-37.After selecting “Sockets” and “TCP/IP” you may enter the IP address of the server (if youchoose “SPX/IPX” ICPCON will scan the network for suitable servers which have SPX/IPX protocol). Enter user name and password as appropriate.Figure 10-37. Remote MachineIn the Select Interface screen, you can press to toggle between a black and white orcolor display.10.3.2 Select ControllerICPCON displays a list of ICP RAID controllers which are installed in the server (in thisexample one SRCU32, see Figure 10-38). This list includes the controller number, thecontroller name, the PCI Bus system (0=primary, 1=secondary, etc.) and the PCI slotnumber, the controller`s features (C=Chaining, 0=RAID 0, 1=RAID 1, 4=RAID 4,5=RAID 5, 10=RAID 10) and the firmware level.
