98Software Installation and User’s GuideICP RAID Console1. Ensure that you have closed all applications and are logged in with administrativerights.2. Open Control Panel and launch the Add/Remove programs icon.3. Select the RAID Software Suite and click Change/Remove for Windows 2000 or Add/Remove for Windows NT.4. The InstallShield Wizard begins.Windows 2000a. Select the Remove option, click Next.b. A progress window appears as files are removed.Note: The RAID device driver will not be removed. Only the RAID softwarecomponents will be removed.c. When finished, a window titled Maintenance Complete appears. Click Finish tocomplete the removal of the RAID software components.Windows NT 4.0a. Select the Modify option, click Next.b. The Select Components screen will launch. Remove the check from the check boxin front of each component that you wish to remove. Do not remove the checkfrom the check box in front of the RAID Device Drivers component unless youintend to remove the device drivers.Note: If you remove the device drivers and you are booting to a host drive, you willbe unable to reboot back into Windows. The operating system will be inaccessible.Click Next.c. A Question Box will appear if you have deselected the ICP RAID Consoles. ClickYes to continue the uninstall.d. A window titled InstallShield Wizard Complete will appear. Click Finish to closethe window.5. After file removal finishes, reboot the computer to complete the uninstall.10.3 The ICPCON ProgramICPCON is a software utility for configuring and diagnosing RAID subsystems built onICP RAID controllers. ICPCON configures the RAID subsystem into four drive levels ofhierarchy:Physical Devices Level 1 (lowest level)Logical Drives Level 2Array Drives Level 3Host Drives Level 4
