146Software Installation and User’s GuideICP RAID Consoleinitialization build as “Non-destructive”, any data present on the drives being initialized isdestroyed. However, re-initialization of this RAID array is Non-destructive.Figure 10-103. Progress Information: Non-destructive Array Build10.5.5.2 Host Drive StatusesThe Select Host Drive screen displays a status for each configured host drive (seeFigure 10-102). Refer to Section 10.4.1.2 for descriptions of the host drive statuses.10.5.5.3 Host Drive ScreenFrom the Advanced Setup menu, select Configure Host Drives and press Enter to displaya list of any existing host drives in the Select Host Drive screen. To configure an existinghost drive, highlight the drive in the Select Host Drive screen (Figure 10-102) and pressEnter. The Host Drive screen opens (Figure 10-104). The various menu options for thisscreen are described below.Figure 10-104. Host Drive Menu for an Existing Host DriveChange Drive NameUse this command to change the name of a host drive. The host drive name serves toidentify a host drive.
