Software Installation and User’s Guide87Installing SCO OpenServer8.4.1 SRCD Installation Instructions1. The files needed for srcd are installed as part of the floppy package.2. Configure /etc/srcd.conf to send SNMP traps or execute an external program (forexample, mail) when a disk array controller event occurs. See comments in /etc/srcd.conf for detailed comments and explanations on performing these configurations.3. A script named S99srcd is automatically placed in the /etc/rc2.d directory, which willstart srcd during the boot process (provided that /etc/srcd.conf has been configured asdescribed in step 2). The srcd daemon can also be started manually by executing thecommand: /etc/srcd.4. Remote administration/configuration of the controller on the UnixWare/OpenUNIXmachine is now possible.
