PIM Configuration Examples 1193PIM ConfigurationExamplesPIM-DM ConfigurationExampleNetwork requirements■ Receivers receive VOD information through multicast. The receiver groups ofdifferent organizations form stub networks, and one or more receiver hostsexist in each stub network. The entire PIM domain operates in the dense mode.■ Host A and Host C are multicast receivers in two stub networks N1 and N2.■ Router D connects to the network that comprises the multicast source (Source)through Ethernet 1/0.■ Router A connects to N1 through Ethernet 1/0, and to Router D through Serial2/0.■ Router B and Router C connect to N2 through their respective Ethernet 1/0,and to Router D through their respective POS 5/0.■ IGMPv2 is required on Router A, Router B, Router C and hosts in N1, and N2.Router B is the IGMP querier on the multi-access subnet.View the content of the PIMrouting tabledisplay pim [ vpn-instancevpn-instance-name | all-instance ]routing-table [ group-address [ mask{ mask-length | mask } ] | source-address[ mask { mask-length | mask } ] |incoming-interface [ interface-typeinterface-number | register ] |outgoing-interface { include | exclude| match } { interface-typeinterface-number | register } | modemode-type | flags flag-value | fsm ] *Available in anyviewView the RP information display pim [ vpn-instancevpn-instance-name | all-instance ]rp-info [ group-address ]Available in anyviewReset PIM control messagecountersreset pim [ vpn-instancevpn-instance-name | all-instance ]control-message counters [ interfaceinterface-type interface-number ]Available in userviewTo do... Use the command... Remarks
