Configuring Information Center 2145Setting to OutputSystem Information to aLog HostSetting to OutputSystem Information tothe Trap BufferTo do... Use the command... RemarksEnter system view system-view -Enable information center info-center enable OptionalEnabled by defaultName the channel with aspecified channel numberinfo-center channelchannel-number namechannel-nameOptionalRefer to Table 69 for defaultchannel names.Specify a log host andconfigure the parameterswhen system information isoutput to the log hostinfo-center loghost host-ip[ channel { channel-number |channel-name } ] [ facilitylocal-number ] *RequiredDisabled by default withchannel 2 as the defaultchannel when enabledConfigure the sourceinterface through which loginformation can be output toa log hostinfo-center loghost sourceinterface-typeinterface-numberOptionalNo source interface isconfigured by default, and thesystem selects an interface asthe source interfaceConfigure the output rules ofthe system informationinfo-center source{ module-name | default }channel { channel-number |channel-name } [ debug{ level severity | state state }* | log { level severity | statestate } * | trap { level severity| state state }* ] *OptionalRefer to Table 71 for theoutput rules of the systeminformation.Configure the format of thetime stamp for loginformationinfo-center timestamploghost { date |no-year-date | none }Optionaldate by defaultTo do... Use the command... RemarksEnter system view system-view -Enable information center info-center enable OptionalEnabled by defaultName the channel with aspecified channel numberinfo-center channelchannel-number namechannel-nameOptionalRefer to Table 69 for defaultchannel names.Configure the channelthrough which systeminformation can be output tothe trap buffer and specify thebuffer sizeinfo-center trapbuffer[ channel { channel-number |channel-name } | sizebuffersize ] *OptionalSystem information is outputto the trap buffer by defaultwith channel 3 (known astrapbuffer) as the defaultchannel and a default buffersize of 256Configure the output rules ofthe system informationinfo-center source{ module-name | default }channel { channel-number |channel-name } [ debug{ level severity | state state }*| log { level severity | statestate }* | trap { level severity |state state } * ] *OptionalRefer to Table 71 for theoutput rules of the systeminformation.
