H.323 Gateway Configuration 2361Configuration procedureFollow these steps to configure basic H.323 gateway functions:n ■ For more information about POTS and VoIP entities, refer to “Configuring POTSEntity” on page 2266 and “Configuring VoIP Entity” on page 2271.■ Before you can configure a secondary gatekeeper, you must first configure aprimary gatekeeper with the gk-id command.■ You can use the ras-on command to register with the gatekeeper only afteryou complete all required basic voice gateway configurations.Configuring RegistrationPasswordYou may configure the gateway to send a password with the RPQ message sentfor registration with the gatekeeper. When the gatekeeper receives this request, itcompares the password with the one configured on it for the gateway. Only whenthey are the same will the gatekeeper accept the request and return an RCF.After the GK Client (router) is configured with the register password, the passwordis carried during the whole register process.To do... Use the command... RemarksEnter system view system-view -Enter voice view voice-setup -Configure an H.323descriptorvoip h323-descriptordescriptorOptionalThe default is Wqldg0Hcwfydz.If you want to change thedescriptor, do that under theguidance of a technicalengineer.Enter gateway view gk-client -Assign an area ID to theH.323 gatewayarea-id string OptionalNo area ID is assigned bydefault.Bind a source IP address,normally the IP address of aloopback interface, with theH.323 gatewaygw-address ip-address RequiredNo source IP address is bound bydefault.Configure a gateway alias gw-id namestring RequiredNo gateway alias is configuredby default. Each gateway can beassigned only one alias.Configure a primarygatekeepergk-id gk-name gk-addrgk-ipaddress [ ras-port ]RequiredNot configured by default.The default RAS port is 1719.Configure a secondarygatekeepergk-2nd-id gk-namegk-addr gk-ipaddress[ ras-port ]OptionalNot configured by default.The default RAS port is 1719.Activate the gatekeeper clientfunction to register with thegatekeeperras-on RequiredNot activated by default.
