Scheduling an NQA Test Group 2029Scheduling an NQATest GroupWith this configuration, you can set the start time and time period for a test groupto perform the test and start the test.Configuration prerequisitesBefore scheduling an NQA test group, make sure:■ Test parameters corresponding to a test type have been configured;■ For the test which needs the cooperation with the NQA server, configurationon the NQA server has been completed.Scheduling an NQA test groupFollow these steps to schedule an NQA test group:Configure the number ofprobes in a testprobe count times OptionalBy default, one probe isperformed in a test.Configure the NQA probetime-out timeprobe timeout timeout OptionalBy default, the timeout time is3000 milliseconds.This parameter is not availablefor a UDP-jitter test.Configure the maximumnumber of history records thatcan be saved in a test grouphistory-records number Optional50 by default.Configure the maximumnumber of hops a probepacket traverses in thenetworkttl value Optional20 by default.This parameter is not availablefor a DHCP test.Configure the ToS field in anIP packet header in an NQAprobe packettos value Optional0 by default.This parameter is not availablefor a DHCP test.Enable the routing tablebypass functionroute-option bypass-route OptionalDisabled by default.This parameter is not availablefor a DHCP test.To do... Use the command... RemarksTo do... Use the command... RemarksEnter system view system-view -Schedule an NQA test group nqa schedule admin-nameoperation-tag start-timenow lifetime foreverRequiredConfigure the maximumnumber of the tests that theNQA client can simultaneouslyperformnqa max-concurrentnumberOptionalThe default settings for thiscommand vary with devicemodels.
