Configuring Load Sharing 1965Follow these steps to associate an interface with a Track object:Configuring LoadSharingThe backup center detects the data traffic on the main interface to decidewhether to bring up or shut down the backup interface.Follow these steps to configure load sharing:n When multiple backup interfaces are assigned the same priority, they are broughtup or shut down depending on the order they are configured■ The backup interface configured first is used first to participate in load sharingwith the main interface.■ The backup interface configured later is shut down first and exits load sharingwith the main interface.c CAUTION:■ If the available bandwidth used for setting the thresholds is 0kbit/s (the defaultvalue), the backup center automatically obtains the available bandwidthprovided by the system to set the thresholds. If the backup center fails toobtain the physical bandwidth, it would prompt you to reconfigure.■ If the available bandwidth configured for setting the thresholds exceeds thephysical bandwidth on the interface, the load balancing does not take effect.Displaying andMaintaining theBackup CenterFollow these steps to display and maintain the backup center:To do... Use the command... RemarksEnter system view system-view -Enter interface view interface interface-typeinterface-number-Associate an interface with aTrack objectstandby tracktrack-entry-numberRequiredAn interface is not associatedwith a Track object bydefault.To do... Use the command... RemarksEnter system view system-view --Enter main interface view interface interface-typeinterface-number--Configure the availablebandwidth used for settingthe thresholdsstandby bandwidth size Optional0kbit/s by default.Configure load sharingthresholdsstandby thresholdenable-thresholddisable-thresholdRequiredNo load sharing thresholds areconfigured by default.Configure the interval fordetecting traffic size on themain interfacestandby timer flow-checkintervalOptional30 seconds by default.
