2296 CHAPTER 133: DIAL PLAN CONFIGURATIONn ■ The voice entity type selection priority rule takes precedence over the voiceentity selection priority rule.■ The priority of a value with a T (for example, 3.T) is higher than that of thesame value without a T (for example, 3).Configuring a NumberPriority PeerConfigurationPrerequisitesThe required basic configurations have been completed on POTS, VoIP, and VoFRentities.Configuration Procedure Follow these steps to configure a number priority peer:To do... Use the command... RemarksEnter system view system-view -Enter voice view voice-setup RequiredEnter voice dial program view dial-program RequiredEnter voice entity view entity entity-number { pots |vofr | voip }-Configure the voice entityprioritypriority priority-order Optional0 by default.Exit voice entity view quit -Configure voice entity typeselection priority rulesselect-rule type-first1st-type 2nd-type 3rd-typeOptionalBy default, voice entities arenot selected according to theirtypes.Configure voice entityselection priority rulesselect-rule rule-order1st-rule [ 2nd-rule ][ 3rd-rule ]OptionalBy default, voice entities areselected in sequence of exactmatch, priority, randomselection, and longest idletime.Configure the maximumnumber of voice entitiesfoundselect-rule search-stopmax-numberOptionalBy default, the maximumnumber of voice entitiesfound is 128.Enter voice entity view entity entity-number { pots |vofr | voip }-Disable the voice entity searchfunctionselect-stop OptionalBy default, the voice entitysearch function is enabled.To do... Use the command... RemarksEnter system view system-view -Enter voice view voice-setup -Enter voice dial program view dial-program -
