IMA-E1/T1 Interface Configuration 75Network diagramFigure 1 Network diagram for IMA-E1/T1 interface configurationConfiguration procedure# Assign two links to IMA group 1. system-view[Sysname] interface atm 5/0[Sysname-Atm5/0] undo ip address[Sysname-Atm5/0] ima ima-group 1[Sysname-Atm5/0] interface atm 5/1[Sysname-Atm5/1] undo ip address[Sysname-Atm5/1] ima ima-group 1[Sysname-Atm5/1] quit# Assign another two links to IMA group 2.[Sysname] interface atm 5/2[Sysname-Atm5/2] undo ip address[Sysname-Atm5/2] ima ima-group 2[Sysname-Atm5/2] interface atm 5/3[Sysname-Atm5/3] undo ip address[Sysname-Atm5/3] ima ima-group 2[Sysname-Atm5/3] quit# Create PVCs and assign IP addresses for the IMA groups.[Sysname] interface ima-group 5/1[Sysname-Ima-group5/1] ip address 10.110.110.1 255.255.255.0[Sysname-Ima-group5/1] pvc aaa 1/42[Sysname-atm-pvc-Ima-group5/1-1/42-aaa] map ip 10.10.10.10 broadcast[Sysname-atm-pvc-Ima-group5/1-1/42-aaa] quit[Sysname-atm-pvc-Ima-group5/1] quit[Sysname] interface ima-group 5/2[Sysname-Ima-group5/2] ip address 10.110.120.1 255.255.255.0[Sysname-Ima-group5/2] pvc bbb 1/92[Sysname-atm-pvc-Ima-group5/2-1/92-bbb] map ip 10.10.10.10 broadcastTroubleshooting ATMIMA-E1/T1 InterfacesYou can start troubleshooting an ATM interface with testing network connectivityusing the ping command or the extended ping command. In an extended pingcommand, you can specify some options in IP header. For more information on theuse of the ping command, refer to “System Maintaining and Debugging” on page2119.ATM IMA 110.110 .110 .1 /24ATM IMA 210.110 .120 .1 /24Ă Ă
