General Configuration ScreenDLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-453. Press ENTER to set the system clock to the time in the input field.4. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press ENTER.If the time entered is a valid format, the Event Message Line at the top ofthe screen displays “SAVED OK”. If the entry is not valid, LocalManagement does not alter the current value and refreshes the ModuleTime field with the previous value.5.15.7 Entering a New Screen Refresh TimeThe screen refresh time is set from 3 to 99 seconds with a default of 3seconds. To set a new screen refresh time, perform the following steps:1. Use the arrow keys to highlight the Screen Refresh Time field.2. Enter a number from 3 to 99.3. Press ENTER to set the refresh time to the time entered in the inputfield.4. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press ENTER.If the time entered is within the 3 to 99 seconds range, the Event MessageLine at the top of the screen displays “SAVED OK”. If the entry is notvalid, Local Management does not alter the current setting, but it doesrefresh the Screen Refresh Time field with the previous value.5.15.8 Setting the Screen Lockout TimeThe screen lockout time can be set from 1 to 30 minutes with a default of15 minutes. To set a new lockout time, perform the following steps:1. Use the arrow keys to highlight the Screen Lockout Time field.2. Enter a number from 1 to 30.3. Press ENTER to set the lockout time in the input field.4. Use the arrow keys to highlight the SAVE command at the bottom ofthe screen and press ENTER.
