Chapter 5: Local Management5-102 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide• Special Commands – Allow the user to exit from Network Tools. Thecommands are done, exit, and quit.The commands are presented in the following format:command:Syntax: Shows the required command format. Itindicates where arguments, if any, must bespecified.Description: Briefly describes the command and its uses.Options: Lists any additional fields in the appropriateformat that may be added to the command.Example: Shows an example of the command.5.31.1 Built-in CommandsThe built-in commands listed in this section activate functions on themanaged device or devices being accessed through Network Tools.arp:Syntax: arp Description: The arp command provides access to the ARP(Address Resolution Protocol) cache, enablingyou to view cache data, delete entries, or add aThe conventions used in describing the commands in NetworkTools are as follows:Arguments enclosed by [ ] are required.Arguments enclosed by < > are optional.In the following command examples, the information enteredby the user is shown in bold Helvetica font .To abort the output or interrupt a process, press the CONTROLkey and c key simultaneously, designated as ^C here.
