Port Redirect Function ScreenDLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-852. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the port number displayed in the brackets [n] until theappropriate port number is displayed.3. Use the arrow keys to highlight the Destination Port field.4. Use the SPACE bar or BACKSPACE to step to the appropriate portnumber for the destination port.5. Use the arrow keys to highlight the Status field.6. Use the SPACE bar to select either the ADD or DEL (delete) option.Press ENTER. This adds or deletes the port selections made in steps 2and 4 and also updates the screen Source Port and Destination Port list.7. Use the arrow keys to highlight the Errors field.8. Use the SPACE bar to select either the ON or OFF option and pressENTER. ON forces the source module and port to forward erroredframes to the destination module(s) and port(s). OFF forces theerrored frames to be dropped before forwarding traffic.9. Use the arrow keys to highlight SAVE at the bottom of the screen.Press ENTER. The message “SAVED OK” is displayed. This savesthe new settings and updates the Source Interface and DestinationInterface read-only fields.If more than one port is to be redirected, repeat steps 1 through8 for each additional setting, then go to step 9 to save all thenew settings at once.
