Chapter 1: Introduction1-6 DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide• Designate workstations to receive SNMP traps from the DLE2X-MAand DLE3X-MA interface modules and the DLM6C-AA chassis.• Configure module specific SNMP MIB objects including the IETFBridge MIB objects.Chapter 5 provides detailed information about Local Management of theDLE2X-MA and DLE3X-MA, the optional Fast Ethernet InterfaceModules and the DLM6C-AA chassis. The associated High SpeedInterface Module user’s guide provides detailed information about LocalManagement of the applicable HSIM.1.2 OPTIONAL FEATURESOptions for the DLE2X-MA and DLE3X-MA are Fast Ethernet InterfaceModules and High Speed Interface Modules, which add remote uplinkcapability.Digital Equipment Corporation provides Fast Ethernet Interface Modulesfor the DLE2X-MA to support uplinks to 100 Mbps Ethernet backbonesor high speed connections to local servers. The Fast Ethernet InterfaceModules are listed in Table 1-1.Digital Equipment Corporation provides High Speed Interface Modulesfor the DLE3X-MA to provide for additional connectivity to other highspeed networking technologies such as ATM, WANs and FDDI. TheHSIMs available for the DLE3X-MA are listed in the Release Notes.Table 1-1 Fast Ethernet Interface ModulesP/N Description ApplicationDELTX-UI Uses RJ45connectorSupports Shielded Twisted Pair (STP) andCategory 5 Unshielded Twisted Pair (UTP)cabling.DELFX-UI Uses SCconnector Supports multimode fiber optic cabling.DELF3-UI Uses SCconnector Supports single mode fiber optic cabling.