DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide C-1APPENDIX CMODE SWITCH BANK SETTINGS ANDOPTIONAL INSTALLATIONSThis appendix covers the following items:• Required tools (Section C.1)• Locations, functions, and settings for the mode switches (Section C.2)• Installing Optional Fast Ethernet Interface Modules (Section C.3)C.1 REQUIRED TOOLSYou need the following tools to perform the procedures provided in thisappendix:• Antistatic wrist strap (provided with DLM6C-AA chassis)• Phillips screwdriverC.2 SETTING THE MODE SWITCHThese mode switches are set at the factory and do not need to be changedunless you intend to perform the following:• Force download a new image file from a BootP server.• Clear NVRAM and restore all user-entered parameters such as the IPaddress and subnet masks to the DLE2X-MA and DLE3X-MA“Default” configuration settings.• Clear user-entered passwords stored in NVRAM and restore thedefault passwords.The following procedures may also be performed through LocalManagement. The mode switches should only be used if it isnot possible to make a Local Management connection. Refer toChapter 5, Local Management, for instructions on how toperform these tasks.