The Interface Statistics ScreenDLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-91Frames Frwded (Read-Only)Displays the number of frames forwarded by the interface.[1-12], [13-24], or [25-26] (DLE2X-MA), [25] (DLE3X-MA) (Selectable)When the Switch Statistics is displayed, the statistics are displayed for thefirst 12 ports. These fields allow the user to step to a second or thirdscreen for the same type of information for ports 13 through 24 or ports25 and 26 of the DLE2X-MA and port 25 (HSIM) of the DLE3X-MA.While on the second or third screen, the user can navigate back to earlierscreens by highlighting the [1-12] and/or [13-24] fields and pressingENTER.CLEAR COUNTERS (Command)This command is used to reset all statistic counters to zero. For details onhow to use this field, refer to Section 5.28.1.5.28.1 Using the Clear Counters CommandTo reset all the statistics counters to zero, perform the following steps:1. Use the arrow keys to highlight the CLEAR COUNTERS field.2. Press ENTER, the counters for the selected port are reset to zero.5.29 THE INTERFACE STATISTICS SCREENThe Interface Statistics screen is used to gather MIB-II statistics for all ofthe DLE2X-MA and DLE3X-MA interfaces (ports 1 through 24 and FastEthernet Interface Modules and all backplane interfaces) with theexception of an HSIM installed in the DLE3X-MA.Access the Interface Statistics screen by using the arrow keys to highlightthe INTERFACE STATISTICS menu item on the Module StatisticsMenu screen and pressing ENTER. The Interface Statistics screen,Figure 5-34, displays.The MultiSwitch HSIMs gather their own statistics, and may beviewed via the Local Management screens of the applicableHSIM. Refer to your HSIM documentation for information onhow to access these screens.
