Chapter 5: Local Management5-86 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide5.26 BROADCAST SUPPRESSION SCREENThe Broadcast Suppression screen, Figure 5-31, allows the user to set adesired limit of receive broadcast frames per port per second.Access the Broadcast Suppression screen from the Module SpecificConfiguration screen by using the arrow keys to highlight theBROADCAST SUPPRESSION menu item and pressing ENTER. TheBroadcast Suppression screen displays.Figure 5-31 Broadcast Suppression ScreenThe Broadcast Suppression screen may not be available if theoperational mode of the module has been set to 802.1QSWITCHING. Refer to your Release Notes to see whatoperational modes support Broadcast Suppression. Refer toSection 5.15.9, Setting the Operational Mode, for instructionson configuring the operational mode of the module.Any broadcast frames received above the desired thresholdwill be dropped.Firmware Revision: XX.XX.XXBroadcast SuppressionLKG-10861-98FBOOTPROM Revision: XX.XX.XXPORT #123456789101112Time Since Peak999:23:59999:23:59999:23:59999:23:59999:23:59999:23:59999:23:59999:23:59999:23:59999:23:59999:23:59999:23:59Peak Rate150000150000150000150000150000150000150000150000150000150000150000150000Threshold150000150000150000150000150000150000150000150000150000150000150000150000Module Type: DLE22-MASlot Number: XMS 700 LOCAL MANAGEMENTEvent Message LineTotal RX123456789101234567891012345678910123456789101234567891012345678910123456789101234567891012345678910123456789101234567891012345678910Reset Peak[NO][NO][NO][NO][NO][NO][NO][NO][NO][NO][NO][NO]RETURNRETURNSAVE [13-24]EXIT
