Chapter 5: Local Management5-54 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide5.17 SNMP TRAPS SCREENSince the DLE2X-MA and DLE3X-MA are SNMP compliant devices,they can send messages to multiple Network Management Stations toalert users of status changes. The SNMP Traps screen is shown inFigure 5-22.Access the SNMP Traps screen from the Module Configuration Menuscreen by using the arrow keys to highlight the SNMP TRAPS field andpressing ENTER. The SNMP Traps screen displays.Figure 5-22 SNMP Traps ScreenThe following explains each field of the SNMP Traps screen.It is only necessary to assign SNMP traps if the user desiresthe traps to be sent to different addresses than those assignedin Section 5.9, which details how to set SNMP Traps for theDLM6C-AA chassis.Firmware Revision: XX.XX.XXSNMP TrapsLKG-10852-98FBOOTPROM Revision: XX.XX.XXTrap Community NamepublicpublicpublicpublicpublicpublicpublicpublicModule Type: DLE22-MASlot Number: XMS 700 LOCAL MANAGEMENTEvent Message LineRETURNSAVETrap Destination0.0.0.00.0.0.00.0.0.00.0.0.00.0.0.00.0.0.00.0.0.00.0.0.0Enable Traps[NO][NO][NO][NO][NO][NO][NO][NO]EXIT
