Black plate (64,1)Cadillac STS Owner Manual - 2011START BUTTON RECALLIf your vehicle has the optional memory package, youwill have this feature. When this feature is turned on,you can recall any previously programmed seat, mirror,and steering column position when the start button onthe ignition is pressed.Programmable ModesMode 1: ONMode 2: OFF (default)To program the vehicle to a different mode:1. Enter the PERSONAL SETTINGS MENU byfollowing the instructions listed previously under“Entering the Personal Settings Menu.”2. Turn the tune/select knob until START BUTTONRECALL is highlighted.3. Press the tune/select knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear next to the feature name.If this feature is selected, REMOTE RECALL MEMORYcannot be selected.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next featureavailable on your vehicle.AUTO EXIT SEATIf your vehicle has the optional memory package, youwill have this feature. When this feature is turned on,you can recall any previously programmed exit positionfor the driver's seat when the vehicle is off, the shiftlever is in P (Park), and the driver's door is opened.Programmable ModesMode 1: ONMode 2: OFF (default)To program the vehicle to a different mode:1. Enter the PERSONAL SETTINGS MENU byfollowing the instructions listed previously under“Entering the Personal Settings Menu.”2. Turn the tune/select knob until AUTO EXIT SEATis highlighted.3. Press the tune/select knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear in the box next to the feature name.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next featureavailable on your vehicle.3-64