Cadillac 2011 STS Owner's Manual

Also see for 2011 STS: Brochure Specifications Owner's manual

Black plate (77,1)Cadillac STS Owner Manual - 2011Driver Selection Submenu ItemsDRIVER 1/DRIVER 2The numbers on the back of each keyless accesstransmitter correspond to DRIVER 1 and DRIVER 2.If you would like to recall or store driver settings for thedriver that does not correspond to the number on theback of the keyless access transmitter that you areusing:1. Enter the memory programming mode for yourdriver settings by following the instructions listedpreviously under “Entering the Driver SelectionSubmenu.”2. From the DRIVER SELECTION submenu, turn thetune/select knob to highlight the driver number thatyou want, either DRIVER 1 or DRIVER 2.3. Set your choice by pressing in the tune/select knob.If you would like to recall or store driver settings for theselected driver, see “RECALL DRIVER SETTINGS” or“STORE DRIVER SETTINGS” later in this section.If you would like to recall or store exit settings for theselected driver, see “RECALL EXIT SETTINGS” or“STORE EXIT SETTINGS” later in this section.RECALL DRIVER SETTINGSTo recall driver settings:1. Enter the memory programming mode for yourdriver settings by following the instructions listedpreviously under “Entering the Driver SelectionSubmenu.”2. From the DRIVER SELECTION submenu, turn thetune/select knob to scroll to RECALL DRIVERSETTINGS and press in the knob.If the vehicle is in P (Park), one beep will soundand your previously saved driving position will thenbe recalled.If the vehicle is not in P (Park), three beeps willsound and your previously saved driving positionwill not be recalled.A memory recall can be stopped by pressing anymemory seat or mirror position button.If you would like the stored driving positions to berecalled when unlocking your vehicle with the keylessaccess transmitter or when starting your vehicle, see“REMOTE RECALL MEMORY” or “START BUTTONRECALL” under Vehicle Personalization on page 3‑59.3-77