Black plate (49,1)Cadillac STS Owner Manual - 2011{ WARNING:Do not attach more than one child restraint to asingle anchor. Attaching more than one childrestraint to a single anchor could cause theanchor or attachment to come loose or evenbreak during a crash. A child or others could beinjured. To reduce the risk of serious or fatalinjuries during a crash, attach only one childrestraint per anchor.{ WARNING:Children can be seriously injured or strangled if ashoulder belt is wrapped around their neck andthe safety belt continues to tighten. Buckle anyunused safety belts behind the child restraint sochildren cannot reach them. Pull the shoulder beltall the way out of the retractor to set the lock,if your vehicle has one, after the child restrainthas been installed.Notice: Do not let the LATCH attachments rubagainst the vehicle’s safety belts. This may damagethese parts. If necessary, move buckled safety beltsto avoid rubbing the LATCH attachments.Do not fold the empty rear seat with a safety beltbuckled. This could damage the safety belt or theseat. Unbuckle and return the safety belt to itsstowed position, before folding the seat.1. Attach and tighten the lower attachments to thelower anchors. If the child restraint does not havelower attachments or the desired seating positiondoes not have lower anchors, secure the childrestraint with the top tether and the safety belts.Refer to your child restraint manufacturerinstructions and the instructions in this manual.1. 1. Find the lower anchors for the desiredseating position.1. 2. Put the child restraint on the seat.1. 3. Attach and tighten the lower attachments onthe child restraint to the lower anchors.2-49